Warning This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov.
Warning This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov.
Ripcord® delivers the best one-pass cleaning you can get for your firearm. Run it through your gun from Breech-to-Muzzle®, with no gravity feed necessary. The rigid, helix-shaped rubber core keeps the cleaning surface pressed against the bore, engaging the rifling for an aggressive clean. The braided Nomex® surface can take up to 700 degree heat, so you can clean it at the range or in the field while the barrel is still hot. Attach a bore brush to get an even more thorough clean. It's fast, effective and ultra-portable.
Nomex® is a registered trademark of DuPont™.
- Cleans: .270 cal/6.8mm/7mm
- Length: 36"
- 10 inches of aggressive cleaning surface
- Caliber specific molded rubberized core for 360 degree cleaning
- Heat resistant up to 700 degrees F
- Nomex® fibers act as both a brush to loosen and a patch to capture fouling particles
- Easy-feed design makes for quicker cleaning from Breech-to-Muzzle®
- Equipped with 8-32 threaded ends to fit all Otis cleaning components
Ripcord® delivers the best one-pass cleaning you can get for your firearm. Run it through your gun from Breech-to-Muzzle®, with no gravity feed necessary. The rigid, helix-shaped rubber core keeps the cleaning surface pressed against the bore, engaging the rifling for an aggressive clean. The braided Nomex® surface can take up to 700 degree heat, so you can clean it at the range or in the field while the barrel is still hot. Attach a bore brush to get an even more thorough clean. It's fast, effective and ultra-portable.
Nomex® is a registered trademark of DuPont™.
- Cleans: .270 cal/6.8mm/7mm
- Length: 36"
- 10 inches of aggressive cleaning surface
- Caliber specific molded rubberized core for 360 degree cleaning
- Heat resistant up to 700 degrees F
- Nomex® fibers act as both a brush to loosen and a patch to capture fouling particles
- Easy-feed design makes for quicker cleaning from Breech-to-Muzzle®
- Equipped with 8-32 threaded ends to fit all Otis cleaning components
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
Great, Effective Cleaner
I like these cleaners! It is the most effective pull-through cleaning tool to use in the field for me. I find it to be more thorough than others I have used. The ability to add a new (not worn out) brush to enhance the cleaning gives me more consistency and removes the concerns of a fouled barrel affecting accuracy.
Quickest Bore cleaner
My favorite rifle is a Savage model 11 in 7-08 and it deserves nothing but the best. That’s why I use Otis Ripcord after every shoot. Ralph C.
Ripcord
After a day of shooting, I looked down the bore with a bore scope, ran the 270 ripcord down once and relooked down the bore with the bore scope. I did not need to run the ripcord a second time. Ran the ripcord a second time with a patch attachment with oil.
A good product.
I purchased four different calibers. They are all high quality and durable. I'm glad I got them.
