Ripcord®

.40cal/10MM Pistol Ripcord®

$14.99
SKU: FG-RC-341

Ripcord® delivers the best one-pass cleaning you can get for your firearm. Run it through your gun from Breech-to-Muzzle®, with no gravity feed necessary. The rigid, helix-shaped rubber core keeps the cleaning surface pressed against the bore, engaging the rifling for an aggressive clean. The braided Nomex® surface can take up to 700 degree heat, so you can clean it at the range or in the field while the barrel is still hot. Attach a bore brush to get an even more thorough clean. It's fast, effective and ultra-portable.

Nomex® is a registered trademark of DuPont™. 

  • Cleans: .40cal/ 10mm
  • Length: Available in 22.5" and 46"
  • 10 inches of aggressive cleaning surface
  • Caliber specific molded rubberized core for 360 degree cleaning
  • Heat resistant up to 700 degrees F
  • Nomex® fibers act as both a brush to loosen and a patch to capture fouling particles
  • Easy-feed design makes for quicker cleaning from Breech-to-Muzzle®
  • Equipped with 8-32 threaded ends to fit all Otis cleaning components

 

FULL DESCRIPTION
Full Description
Length *

Warning This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov.

$14.99
(0)

Ripcord® delivers the best one-pass cleaning you can get for your firearm. Run it through your gun from Breech-to-Muzzle®, with no gravity feed necessary. The rigid, helix-shaped rubber core keeps the cleaning surface pressed against the bore, engaging the rifling for an aggressive clean. The braided Nomex® surface can take up to 700 degree heat, so you can clean it at the range or in the field while the barrel is still hot. Attach a bore brush to get an even more thorough clean. It's fast, effective and ultra-portable.

Nomex® is a registered trademark of DuPont™. 

  • Cleans: .40cal/ 10mm
  • Length: Available in 22.5" and 46"
  • 10 inches of aggressive cleaning surface
  • Caliber specific molded rubberized core for 360 degree cleaning
  • Heat resistant up to 700 degrees F
  • Nomex® fibers act as both a brush to loosen and a patch to capture fouling particles
  • Easy-feed design makes for quicker cleaning from Breech-to-Muzzle®
  • Equipped with 8-32 threaded ends to fit all Otis cleaning components

 

Full Description
Length *

Warning This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov.

$5 Flat Rate / $75+ Ships FREE

CLEANING INSTRUCTIONS

  • Made in the USA Badge
  • Standard Issue of the U.S. Military Badge
  • No Nonsense Guarantee Badge

Ripcord® delivers the best one-pass cleaning you can get for your firearm. Run it through your gun from Breech-to-Muzzle®, with no gravity feed necessary. The rigid, helix-shaped rubber core keeps the cleaning surface pressed against the bore, engaging the rifling for an aggressive clean. The braided Nomex® surface can take up to 700 degree heat, so you can clean it at the range or in the field while the barrel is still hot. Attach a bore brush to get an even more thorough clean. It's fast, effective and ultra-portable.

Nomex® is a registered trademark of DuPont™. 

  • Cleans: .40cal/ 10mm
  • Length: Available in 22.5" and 46"
  • 10 inches of aggressive cleaning surface
  • Caliber specific molded rubberized core for 360 degree cleaning
  • Heat resistant up to 700 degrees F
  • Nomex® fibers act as both a brush to loosen and a patch to capture fouling particles
  • Easy-feed design makes for quicker cleaning from Breech-to-Muzzle®
  • Equipped with 8-32 threaded ends to fit all Otis cleaning components

 

Current Stock:
Width: 5.38
Height: 6.00
Depth: 0.50
SKU: FG-RC-341