Ripcord®

.45 cal Rifle/Pistol Ripcord®

$15.99
SKU: FG-RC-345

Ripcord® delivers the best one-pass cleaning you can get for your firearm. Run it through your gun from Breech-to-Muzzle®, with no gravity feed necessary. The rigid, helix-shaped rubber core keeps the cleaning surface pressed against the bore, engaging the rifling for an aggressive clean. The braided Nomex® surface can take up to 700 degree heat, so you can clean it at the range or in the field while the barrel is still hot. Attach a bore brush to get an even more thorough clean. It's fast, effective and ultra-portable.

Nomex® is a registered trademark of DuPont™. 

  • Cleans: .45, .450, .454, .458 and .460cal
  • Length: 36"
  • 10 inches of aggressive cleaning surface
  • Caliber specific molded rubberized core for 360 degree cleaning
  • Heat resistant up to 700 degrees F
  • Nomex® fibers act as both a brush to loosen and a patch to capture fouling particles
  • Easy-feed design makes for quicker cleaning from Breech-to-Muzzle®
  • Equipped with 8-32 threaded ends to fit all Otis cleaning components

 

FULL DESCRIPTION
Full Description

Warning This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov.

Product image of Otis Technology .45 cal Rifle/Pistol Ripcord® pull through bore cleaner Click here to enlarge
Infographic of Otis Technology .45 cal Rifle/Pistol Ripcord® pull through bore cleaner Click here to enlarge
Product detail of Otis Technology .45 cal Rifle/Pistol Ripcord® pull through bore cleaner handle Click here to enlarge
Product image of Otis Technology .45 cal Rifle/Pistol Ripcord® pull through bore cleaner Infographic of Otis Technology .45 cal Rifle/Pistol Ripcord® pull through bore cleaner Product detail of Otis Technology .45 cal Rifle/Pistol Ripcord® pull through bore cleaner handle
$15.99
(0)

Ripcord® delivers the best one-pass cleaning you can get for your firearm. Run it through your gun from Breech-to-Muzzle®, with no gravity feed necessary. The rigid, helix-shaped rubber core keeps the cleaning surface pressed against the bore, engaging the rifling for an aggressive clean. The braided Nomex® surface can take up to 700 degree heat, so you can clean it at the range or in the field while the barrel is still hot. Attach a bore brush to get an even more thorough clean. It's fast, effective and ultra-portable.

Nomex® is a registered trademark of DuPont™. 

  • Cleans: .45, .450, .454, .458 and .460cal
  • Length: 36"
  • 10 inches of aggressive cleaning surface
  • Caliber specific molded rubberized core for 360 degree cleaning
  • Heat resistant up to 700 degrees F
  • Nomex® fibers act as both a brush to loosen and a patch to capture fouling particles
  • Easy-feed design makes for quicker cleaning from Breech-to-Muzzle®
  • Equipped with 8-32 threaded ends to fit all Otis cleaning components

 

Full Description

Warning This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov.

$5 Flat Rate / $99+ Ships FREE

CLEANING INSTRUCTIONS

  • Made in the USA Badge
  • Standard Issue of the U.S. Military Badge
  • No Nonsense Guarantee Badge

Ripcord® delivers the best one-pass cleaning you can get for your firearm. Run it through your gun from Breech-to-Muzzle®, with no gravity feed necessary. The rigid, helix-shaped rubber core keeps the cleaning surface pressed against the bore, engaging the rifling for an aggressive clean. The braided Nomex® surface can take up to 700 degree heat, so you can clean it at the range or in the field while the barrel is still hot. Attach a bore brush to get an even more thorough clean. It's fast, effective and ultra-portable.

Nomex® is a registered trademark of DuPont™. 

  • Cleans: .45, .450, .454, .458 and .460cal
  • Length: 36"
  • 10 inches of aggressive cleaning surface
  • Caliber specific molded rubberized core for 360 degree cleaning
  • Heat resistant up to 700 degrees F
  • Nomex® fibers act as both a brush to loosen and a patch to capture fouling particles
  • Easy-feed design makes for quicker cleaning from Breech-to-Muzzle®
  • Equipped with 8-32 threaded ends to fit all Otis cleaning components

 

Ripcord® delivers the best one-pass cleaning you can get for your firearm. Run it through your gun from Breech-to-Muzzle®, with no gravity feed necessary. The rigid, helix-shaped rubber core keeps the cleaning surface pressed against the bore, engaging the rifling for an aggressive clean. The braided Nomex® surface can take up to 700 degree heat, so you can clean it at the range or in the field while the barrel is still hot. Attach a bore brush to get an even more thorough clean. It's fast, effective and ultra-portable.

Nomex® is a registered trademark of DuPont™. 

  • Cleans: .45, .450, .454, .458 and .460cal
  • Length: 36"
  • 10 inches of aggressive cleaning surface
  • Caliber specific molded rubberized core for 360 degree cleaning
  • Heat resistant up to 700 degrees F
  • Nomex® fibers act as both a brush to loosen and a patch to capture fouling particles
  • Easy-feed design makes for quicker cleaning from Breech-to-Muzzle®
  • Equipped with 8-32 threaded ends to fit all Otis cleaning components

 

Current Stock:
Width: 3.00
Height: 6.00
Depth: 1.13
SKU: FG-RC-345
UPC: 014895000595

You Might Also Like