PRO+

PRO+ AR-15 Lock Block - Upper Receiver Vise Block

$89.99
SKU: FG-ARLB

The Otis Technology Pro+ AR-15 Lock Block is designed to make the removal and installation of barrels and even hand guards quicker, while also allowing you to tackle stuck barrel nuts with ease. Held in a standard bench vise, the AR-15 Lock Block locks into the barrel extension, securing it from twisting and minimizing the chance of marring. Give it all the elbow grease your project needs, the AR Lock Block has you covered. The torque is applied to the barrel extension rather than aluminum upper – for a stronger, more secure hold. To accommodate internal receiver differences present in the market, the AR-15 Lock Block is designed with a bronze bushing which allows the tool to work with slightly smaller internal specs. Designed for milspec receivers, the AR-15 Lock Block works on most ARs. Crafted from 1018 steel and finished in a manganese phosphate coating, it’ll stand up to the job and then some. To use, simply lock the tool into a standard bench vise at your designated working angle and slide your upper receiver and barrel onto the AR-15 Lock Block. The tool then engages its locking lugs into in the barrel extension to alleviate the tension on the receiver and placing it on the extension itself.

The AR-15 Lock Block:

• Securely and easily work on AR-15 upper receivers

• Alleviates tension on the receiver by engaging locking lugs

• Designed for milspec AR receivers

• Bronze bushing accommodates most ARs

• Compatible with most standard table or bench vises

• Made from 1018 steel with a manganese phosphate coating

 

FULL DESCRIPTION
Full Description

Warning This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov.

$89.99
(0)

The Otis Technology Pro+ AR-15 Lock Block is designed to make the removal and installation of barrels and even hand guards quicker, while also allowing you to tackle stuck barrel nuts with ease. Held in a standard bench vise, the AR-15 Lock Block locks into the barrel extension, securing it from twisting and minimizing the chance of marring. Give it all the elbow grease your project needs, the AR Lock Block has you covered. The torque is applied to the barrel extension rather than aluminum upper – for a stronger, more secure hold. To accommodate internal receiver differences present in the market, the AR-15 Lock Block is designed with a bronze bushing which allows the tool to work with slightly smaller internal specs. Designed for milspec receivers, the AR-15 Lock Block works on most ARs. Crafted from 1018 steel and finished in a manganese phosphate coating, it’ll stand up to the job and then some. To use, simply lock the tool into a standard bench vise at your designated working angle and slide your upper receiver and barrel onto the AR-15 Lock Block. The tool then engages its locking lugs into in the barrel extension to alleviate the tension on the receiver and placing it on the extension itself.

The AR-15 Lock Block:

• Securely and easily work on AR-15 upper receivers

• Alleviates tension on the receiver by engaging locking lugs

• Designed for milspec AR receivers

• Bronze bushing accommodates most ARs

• Compatible with most standard table or bench vises

• Made from 1018 steel with a manganese phosphate coating

 

Full Description

Warning This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov.

$5 Flat Rate / $99+ Ships FREE

CLEANING INSTRUCTIONS

  • Made in the USA Badge
  • Standard Issue of the U.S. Military Badge
  • No Nonsense Guarantee Badge

The Otis Technology Pro+ AR-15 Lock Block is designed to make the removal and installation of barrels and even hand guards quicker, while also allowing you to tackle stuck barrel nuts with ease. Held in a standard bench vise, the AR-15 Lock Block locks into the barrel extension, securing it from twisting and minimizing the chance of marring. Give it all the elbow grease your project needs, the AR Lock Block has you covered. The torque is applied to the barrel extension rather than aluminum upper – for a stronger, more secure hold. To accommodate internal receiver differences present in the market, the AR-15 Lock Block is designed with a bronze bushing which allows the tool to work with slightly smaller internal specs. Designed for milspec receivers, the AR-15 Lock Block works on most ARs. Crafted from 1018 steel and finished in a manganese phosphate coating, it’ll stand up to the job and then some. To use, simply lock the tool into a standard bench vise at your designated working angle and slide your upper receiver and barrel onto the AR-15 Lock Block. The tool then engages its locking lugs into in the barrel extension to alleviate the tension on the receiver and placing it on the extension itself.

The AR-15 Lock Block:

• Securely and easily work on AR-15 upper receivers

• Alleviates tension on the receiver by engaging locking lugs

• Designed for milspec AR receivers

• Bronze bushing accommodates most ARs

• Compatible with most standard table or bench vises

• Made from 1018 steel with a manganese phosphate coating

 

The Otis Technology Pro+ AR-15 Lock Block is designed to make the removal and installation of barrels and even hand guards quicker, while also allowing you to tackle stuck barrel nuts with ease. Held in a standard bench vise, the AR-15 Lock Block locks into the barrel extension, securing it from twisting and minimizing the chance of marring. Give it all the elbow grease your project needs, the AR Lock Block has you covered. The torque is applied to the barrel extension rather than aluminum upper – for a stronger, more secure hold. To accommodate internal receiver differences present in the market, the AR-15 Lock Block is designed with a bronze bushing which allows the tool to work with slightly smaller internal specs. Designed for milspec receivers, the AR-15 Lock Block works on most ARs. Crafted from 1018 steel and finished in a manganese phosphate coating, it’ll stand up to the job and then some. To use, simply lock the tool into a standard bench vise at your designated working angle and slide your upper receiver and barrel onto the AR-15 Lock Block. The tool then engages its locking lugs into in the barrel extension to alleviate the tension on the receiver and placing it on the extension itself.

The AR-15 Lock Block:

• Securely and easily work on AR-15 upper receivers

• Alleviates tension on the receiver by engaging locking lugs

• Designed for milspec AR receivers

• Bronze bushing accommodates most ARs

• Compatible with most standard table or bench vises

• Made from 1018 steel with a manganese phosphate coating

 

Availability: Usually ships within 24 hours
Current Stock:
Width: 2.00
Height: 2.00
Depth: 13.25
SKU: FG-ARLB